P20.40-2143-05
1 Electric fan
2 Bolts
3 Electrical connector
4 Supports
5 Oil line
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Open engine hood | ||
2 | Remove front engine cover | ||
3 | Remove left and right suction fan duct | ||
4 | Separate electrical connector (3) at electric fan (1) | ||
5 | Detach oil line (5) from automatic transmission at radiator | Seal all connections immediately using stop plugs, otherwise the automatic transmission may be damaged due to contamination. | |
Set of stop plugs | |||
6 | Remove bolt (2) | ||
7 | Lift electric fan (1) from the mounts (4) and lift it out upward | Installation: Ensure that the retaining lugs of the electric fan (1) are inserted in the mounts (4) on the radiator. | |
8 | Install in the reverse order | ||
9 | Check transmission oil level and correct if necessary | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
10 | Carry out engine test run |
Set of stop plugs
129 589 00 91 00
참조 문서
- ar0110p2405rt
- ar0110p2405rtb
- ar2700p0270w 자동 변속기에 오일 주입
- ar2710p050103rt 변속기 오일 라인 분리, 연결
- ar8840p1000rt 엔진 후드 열기, 수직으로 세우기, 닫기
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as0000z001101a 후드, 도어, 커버, 슬라이딩 루프 탈, 장착 및 설정작업 시 손가락이 끼이거나 눌려서 입을 수 있는 상해 위험