1 | Bolts |
2 | Belt pulley |
3 | Bolts |
4 | Coolant pump |
5 | Sealing ring |
S20.10-4560-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Notes on coolant | ||
Notes on coolant level | |||
| Remove/install | ||
1 | Drain off coolant | ||
2 | Remove poly-V belt | ||
3 | Remove bolt (1) | Counterhold belt pulley (2). | |
Bolt, belt pulley to coolant pump | |||
Hook wrench | |||
4 | Remove belt pulley (2) from coolant pump (4) | ||
5 | Remove screws (3) | Bolt, coolant pump to crankcase | |
6 | Remove coolant pump(4) | Installation: Replace sealing ring (5). | |
7 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Check for leak tightness with engine running | Visual inspection only. |
699 589 00 05 00
Hook wrench
참조 문서
- ah2000n208001a 냉각수 지침
- ah2000p114201cw 냉각수 레벨 지침
- ar1322s1202pd
- ar2000s1142p
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험
- as2000z000101a 뜨거운 냉각수 분출 시 입은 화상에 의한 피부와 안구의 상해 위험 냉각수의 음용으로 인한 중독 위험