S07.04-4750-09
1 | Differential pressure sensor | 3 | Nut | 5 | Pressure lines | ||
2 | Electrical connector | 4 | Pressure hoses | 6 | Right front brake line |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove | ||
1 | Remove right front wheel. | ||
2 | Remove right fender liner. | ||
3 | Mark pressure hoses (4) in relation to pressure lines (5). | ||
4 | Disconnect electrical connection (2). | ||
5 | Unscrew nut (3). | ||
6 | Remove pressure hoses (4) from pressure lines (5) and seal openings with suitable stop plugs. | Pliers for click clamps | |
Record plug | |||
7 | Remove differential pressure sensor (1) with pressure hoses (4). | The differential pressure sensor (1) can only be removed and replaced together with the pressure hoses (4). | |
| Install | ||
8 | Position differential pressure sensor (1) in installation location. | ||
9 | Attach pressure hoses (4) to pressure lines (5) free of tension. | Observe markings and replace click clamps. | |
Pliers for click clamps | |||
10 | Tighten nut (3). | ||
11 | Connect electrical connection (2). | ||
12 | Read out and delete fault memory and initialize differential pressure sensor (1). | When replacing the differential pressure sensor (1). | |
| |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
13 | Perform engine test run and check differential pressure sensor (1) and pressure hoses (4) in terms of leak tightness. | ||
14 | Install right fender liner. | ||
15 | Mount right front wheel. |
129 589 00 91 00
Record plug
171 589 00 37 00
Pliers for click clamps
참조 문서
- ad0000s200006p
- ah0000p500001a 불순물 및 이물질에 의한 손상 방지 지침
- ah5400p000101a 정전기 방전으로 인한 전자 부품 손상 방지 지침
- ar4010s1100p
- ar8810s1301p
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험