ar0320p3000rx

Replace front crankshaft radial sealing ring

유형 ar · 주제 03.20 · 버전 0100 · 2006-01-24

적용 대상: ENGINE 272, 273 in MODEL 230

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 03 파워트레인 › 03.20 크랭크샤프트 — 시리즈 230

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.41 크랭크샤프트/플라이휠/클러치 디스크 — 시리즈 230

엔진/변속기에도 적용: 272 ***, 273 ***

AR03.20-P-3000RX

Replace front crankshaft radial sealing ring

10.1.06

ENGINE 272, 273 in MODEL 230

Replace front crankshaft radial sealing ring

P03.20-2217-06

2 Belt pulley/vibration damper

5 Crankshaft radial seal

Remove/install

1

Switch off ignition

2

Remove front engine cover

See

Remove/install air filter housing

AR09.10-P-1150RX

3

Remove poly-V-belt

AR13.22-P-1202RX

4

Remove belt pulley/vibration damper (2)

AR03.30-P-1600RX

5

Press out crankshaft radial sealing ring (5) from the mounting bore using a screwdriver

Do not damage the crankshaft and the mounting bore. Use a clean rag as a base while pressing out; otherwise there can be leakage.

Installation: Install front crankshaft radial sealing ring (5).

AR03.20-P-3000-01B

Checking

6

Check the contact surface of crankshaft radial sealing ring (5) at hub of belt pulley/vibration damper (2)

The belt pulley/vibration damper (2) must be replaced if there are score marks and galling.

7

Install in the reverse order

8

Check engine oil level, correct if required.

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

9

Carry out an engine test run and check the engine for leaks

참조 문서