ar0120p9750rx

Remove/install oil separator

유형 ar · 주제 01.20 · 버전 0100 · 2006-01-25

적용 대상: ENGINE 272, 273 in MODEL 230

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 01 엔진 전체, 엔진 배기, 실린더 헤드, 실린더 크랭크케이스 › 01.20 엔진　배기, 실린더헤드　커버 — 시리즈 230

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.31 크랭크 케이스/오일 분리기/배기 — 시리즈 230

엔진/변속기에도 적용: 272 ***, 273 ***

AR01.20-P-9750RX

Remove/install oil separator

10.1.06

ENGINE 272, 273 in MODEL 230

Remove/install oil separator

P01.20-2157-05

1 Cable

2 Oil separator

2a Bolts

3 Left cylinder head cover

4 Hose

Remove/install

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Remove air filter housing

AR09.10-P-1150RX

2

Unclip the line (1) from the bracket at the oil separator (2)

3

Detach hose (4)

4

Remove bolts (2a)

*BA01.20-P-1003-01L

5

Remove oil separator (2) from the left cylinder head cover (3)

Intercept the engine oil that flows out with an absorbent rag.

Installation: Inspect the gasket in the oil separator (2) for wear and damage, if necessary, replace the oil separator (2).

6

Install in the reverse order

Checking

7

Check engine oil level, correct if required.

See

Engine - oil and filter change

AP18.00-P-0101RX

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

8

Conduct engine test run and check the engine for leaks

Crankcase ventilation, cylinder head cover

Number

Designation

Engine 272

Engine 273

BA01.20-P-1003-01L

Bolt connecting oil separator to cylinder head cover

Nm

12

12

참조 문서