ar0120d9750sd

Remove/install oil separator

유형 ar · 주제 01.20 · 버전 0202 · 2011-03-01

적용 대상: ENGINES 646.984 /985 /986 in MODEL 906

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 01 엔진 전체, 엔진 배기, 실린더 헤드, 실린더 크랭크케이스 › 01.20 엔진　배기, 실린더헤드　커버 — 시리즈 646 (모델 984, 985, 986) · 시리즈 906

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.31 크랭크 케이스/오일 분리기/배기 — 시리즈 646 (모델 984, 985, 986) · 시리즈 906

AR01.20-D-9750SD

Remove/install oil separator

24.2.11

ENGINES 646.984 /985 /986 in MODEL 906

Remove/install oil separator

D01.20-1010-08

1 Hose

3 Cylinder head cover

2 Oil separator

Modification notes

17.12.09

Value changed: Bolt for oil separator to cylinder head cover

*BA01.20-N-1004-01M

Remove/install

1

Remove air filter housing

AR09.10-D-1150SD

2

Remove trim panel of cylinder head cover

Installation: Only install cylinder head cover trim panel after checking for leaks.

AR01.20-D-5015SD

3

Detach hose (1)

4

Remove oil separator (2) bolts at cylinder head cover (3)

The oil separator (2) is held in place by six bolts.

*BA01.20-N-1004-01M

5

Remove oil separator (2)

Installation: Clean sealing surfaces, inspect seal, replace if necessary.

6

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Conduct engine test run and check engine for leaks in the area of the oil separator (2)

Crankcase ventilation, cylinder head cover

Number

Designation

Engine
646
in model 906

BA01.20-N-1004-01M

Bolt connecting oil separator to cylinder head cover

Nm

10

참조 문서