D09.10-1106-09
1 Intake air hose downstream of air filter
2 Air filter housing
3 Electrical connector
6 Guides
7 Jump-starting point
4 Electrical connector
5 Intake air hose upstream of air filter
| Remove/install | ||
1 | Remove intake air hose downstream of air filter (1) on air filter housing (2) | ||
2 | Disconnect electrical connectors (3, 4) | ||
3 | Remove intake air hose upstream of air filter (5) | Press together intake air hose upstream of air filter (5) on air filter housing (2) and pull out. | |
4 | Lift air filter housing (2) to the front (arrows) and pull to the rear out of the guides (6) | ||
5 | Unhook jump-starting point (7) on air filter housing (2) | ||
6 | Take out air filter housing (2). | ||
7.1 | Remove intake manifold sensor | When renewing the top section of the air filter housing. | |
8.1 | Remove hot film mass air flow sensor | When renewing the top section of the air filter housing. | |
9 | Install in the reverse order |
참조 문서
- ar0704d0100sd 흡기 매니폴드 압력 센서를 탈, 장착
- ar0707d1453sd 열막 에어 매스 센서 탈, 장착
- ar0910d803001sd