ar0100p2410gm

Disconnect, connect engine wiring harness

유형 ar · 주제 01.00 · 버전 0103 · 2012-02-15

적용 대상: ENGINE 628.962 in MODELS 463.309 /332 /333

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 01 엔진 전체, 엔진 배기, 실린더 헤드, 실린더 크랭크케이스 › 01.00 서문 — 시리즈 463 (모델 309, 332, 333) · 시리즈 628 (모델 962)

EinPAS 25 온보드 전기 시스템/네트워크/다기능 › 25.25 메인 배선 › 25.25.20 엔진 배선 — 시리즈 463 (모델 309, 332, 333) · 시리즈 628 (모델 962)

AR01.00-P-2410GM

Disconnect, connect engine wiring harness

14.2.12

ENGINE 628.962 in MODELS 463.309 /332 /333

Disconnect, connect engine wiring harness

P01.00-2206-09

1 Housing

2 Circuit 30 cable

3 Air plenum chamber and water collector

4 Cover

10 Ground cable

11 Fixing clamp

W10 Ground (battery)

X4/30 Terminal block
(circuit 30, engine)

5 Plug socket

6 Plug socket

7 Plug socket

8 Connector

9 Engine wiring harness

Disconnect, connect engine wiring harness

P01.00-2207-06

N14/2x3 Circuit 30 glow output stage connection

W49 Transmission ground cable

X22/2 Automatic transmission central connector

Remove, Install

1.1

Activate service mode in the TELE AID emergency call system

Only for code ET2: TELE AID - car telephone emergency call system.

AR82.95-P-0005-03GR

Notes on TELE AID emergency call system

Only with code ET2.

AH82.95-P-0001-01GA

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground cable (W10) of battery

Installation: Code radio, set clock, calibrate power windows and set timer on vehicles with stationary heater.

AR54.10-P-0003G

Battery notes

All types.

AH54.10-P-0001-01A

3

Take off housing (1) at terminal block engine circuit 30 (X4/30)

4

Disconnect cable circuit 30 (2) at terminal block engine circuit (X4/30)

5

Remove air plenum chamber and water collector (3)

AR83.10-P-9998GM

6

Take off cover (4) at firewall

7

Unlock and detach connectors (5, 6, 7) at CDI control module (N39/2)

First of all unplug connector (5) to enable connector (6) to be unlocked.

8

Detach plug-in connection (8)

9

Pull out engine wiring harness (9) at body opening

10

Detach ground cable (10)

11

Take off securing clamp (11)

12

Unscrew connection of glow output stage circuit 30 (N14/2x3)

13

Separate central connector of automatic transmission (X22/2) at automatic transmission

Bayonet lock.

14

Unbolt ground cable of transmission (W49)

Unbolt at frame.

15

Install in the reverse order

16.1

Deactivate the service mode in the TELE AID emergency call system

Only for code ET2: TELE AID - car telephone emergency call system.

AR82.95-P-0005-03GR

17

Read diagnostic trouble code memory and erase

STAR DIAGNOSIS
Stored faults which can be due to disconnected cables or a simulation during assembly or test work, must be worked on in the fault memories at the end of the work and erased.

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

*WH58.30-Z-1048-13A

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

참조 문서