GF80.20-W-2007G | Locking vehicle with key in driver's door, function | 31.3.98 |
BODY 972.899 with CODE (FZ3) Convenience locking feature with remote control
W82.40-0058-09
1 Door lock
2 Sliding roof control
A23 CL/CLS control module
M7 Power window motor for driver's door
S74 Door catch switch in driver's door
S87 Lock switch, driver's door
S91 Sliding roof lockout switch
M8 Power window motor for passenger door
M11 Locking motor for driver's door
M12 Locking motor for passenger door
Function sequence
Locking with key at driver's door
1 Basic prerequisites:
Driver and passenger doors closed.
Ignition: OFF.
2 Locking operation actuated mechanically with key in lock (1) in driver's door.
3 The mechanical locking operation is detected by a changeover switch in the locking motor (M11) in the driver's door and by the lock switch (S87), and immediately signaled to the CL/CLS control module (A23).
-----------------------------------------------------------------------------------------
4 The signal from the changeover switch causes the CL/CLS control module to actuate the locking motors (M11 and M12) in the driver and passenger doors.
The signal from the lock switch causes the CL/CLS control module to actuate
the power window motors (M7 and M8) in the driver and passenger doors
and
the sliding/pop-up roof control (2).
The locking motors move to the "locked" position, the closed doors are locked, the open windows and open sliding/pop-up roof are closed within the scope of convenience locking. The cab interior lighting goes out.
-----------------------------------------------------------------------------------------
The sliding/pop-up roof can be prevented from closing with the sliding roof lockout switch (S91).
If the passenger door is open when the locking operation is actuated, the closed driver's door is locked, unlocked and then locked again to indicate that the passenger door is open. In this case, the convenience locking feature is not actuated; the windows and sliding/pop-up roof remain open.
The locking instruction for the passenger door is stored and the passenger door is locked automatically when it is closed later.
To close the windows and sliding/pop-up roof within the scope of convenience locking, it is necessary to repeat the mechanical locking operation at the driver's door after the passenger door is closed later.