ar2010d2460sf

Remove/install coolant thermostat

種別 ar · トピック 20.10 · バージョン 0101 · 2009-11-13

適用: ENGINES 642.992 /993 in MODEL 906

「ja」では利用できません。英語で表示しています。

位置付け

機能グループ 1 エンジン › 20 エンジン冷却 › 20.10 クーラント・ポンプ、サーモスタット — シリーズ 906

EinPAS 15 エンジン › 15.25 エンジン冷却システム › 15.25.30 ポンプ/サーモスタット/プレヒータ — シリーズ 906

エンジン/トランスミッションにも適用: 642 992, 642 993

AR20.10-D-2460SF

Remove/install coolant thermostat

27.10.09

ENGINES 642.992 /993 in MODEL 906

Remove/install coolant thermostat

D20.10-1111-09

1 Coolant thermostat

2 Bolts

3 Charge air manifold

7 Coolant pipe

8 Screw

4 Cover

5 Coolant hose

6 Screw

Remove/install

1

Drain coolant

AR20.00-D-1140SD

2

Remove engine trim panel

AR01.10-D-2405SF

3

Remove bolts (6, 8) and pull back coolant pipe (7)

4

Detach coolant hose (5) at charge air manifold (3)

Installation: Check clamp, replace if necessary.

5

Lift cover (4) and unscrew bolts (2)

Installation: Cover (4) must engage correctly in cylinder head cover.

*BA20.10-N-1005-01Q

6

Remove coolant thermostat (1) on charge air manifold (3)

Installation: Clean seal on coolant temperature sensor (1), if applicable, replace coolant temperature sensor (1) and clean sealing surface on charge air manifold (3).

7

Install in the reverse order

Checking

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Test run engine and check function of coolant thermostat (1)

Coolant pump, coolant thermostat

Number

Designation

Engine
642

BA20.10-N-1005-01Q

Bolt, coolant thermostat housing to charge air manifold

Nm

9

参照文書