ar0940t6020cb

Removing/installing the turbocharger

種別 ar · トピック 09.40 · バージョン 0101 · 2005-09-20

適用: ENGINE 457.944 in model NMB613.367

「ja」では利用できません。英語で表示しています。

位置付け

機能グループ 1 エンジン › 09 エア・インテーク、過給機 › 09.40 ターボ・チャージャ — シリーズ 613(モデル 367)

EinPAS 15 エンジン › 15.30 エアインテーク/過給 › 15.30.51 ターボチャージャ — シリーズ 613(モデル 367)

エンジン/トランスミッションにも適用: 457 944

AR09.40-T-6020CB

Removing/installing the turbocharger

3.4.03

ENGINE 457.944 in model NMB613.367

Removing/installing the turbocharger

T09.40-0035-05

1 Shield

2 Turbocharger

3 Exhaust flap

4 Exhaust manifold

5 Carrier

Removing/installing

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

1

Open maintenance flap

Open the engine compartment flap at the rear and the interior room flap above the engine.

Installation: Do not close engine compartment flap at the rear yet.

2

Remove front muffler

AR49.10-T-4930CB

3

Disconnect exhaust flex pipe from turbocharger (2)

AR49.10-T-7160CB

4

Remove air intake pipe to turbocharger (2)

AR09.10-T-8131-01CB

5

Remove charge air pipe

AR09.41-T-1311CB

6

Detach shield (1) at turbocharger (2)

AR09.40-T-6020-01CA

7

Remove exhaust flap (3)

AR49.10-T-5505CB

8

Detach connections at turbocharger (2)

AR09.40-T-6020-02CA

9

Remove oil return line on turbocharger (2)

Perform work step from below.

AR09.40-T-6021CB

10

Detach exhaust manifold (4) at turbocharger (2)

AR09.40-T-6020-04CA

11

Pull out carrier (5)

The carrier (5) is attached using the bolts on the turbocharger (2) flange.

12

Install in reverse order

General information, function, Start stop button

AH15.30-N-1000-01BB

13

Have a second person crank engine with starter until oil pressure has been built up

In order to prevent the engine firing hold down the Stop pushbutton switch in the engine compartment and press the Start pushbutton switch otherwise there is a risk of engine damage.

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine

Secure vehicle to prevent it from moving off by itself.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

14

Relieve oil pressure in engine

Do not start engine until oil pressure has built up otherwise there is a risk of engine damage.

Crank engine by simultaneously pressing the Start pushbutton switch (S1/10) and the Stop pushbutton switch (S1/11) until the indicator lamp for oil pressure goes out.

Simultaneous pressing prevents the engine firing.

General information, function, Start stop button

AH15.30-N-1000-01BB

15

Close engine compartment flap at rear

参照文書