ar1440b2018tc

Remove/install SCR air humidity and air temperature combination sensor

Tipo ar · tema 14.40 · versione 0201 · 2018-02-21

Valido per: Engine 457, 924, 926 in model 693, 694, 695 Engine 457, 926 in model 693, 695, 934, 958 Engine 460.984 in model 934, 938 Engine 924 in model 979 Engine 924, 926 in model 958, 979

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue — Serie 460 (modelli 984) · Serie 693 · Serie 694 · Serie 695 · Serie 934 · Serie 938 · Serie 958 · Serie 979

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.12 Sensore/interruttore/fascio di cavi — Serie 460 (modelli 984) · Serie 693 · Serie 694 · Serie 695 · Serie 934 · Serie 938 · Serie 958 · Serie 979

Valido anche per motori/cambi: 457 ***, 924 ***, 926 ***

AR14.40-B-2018TC

Remove/install SCR air humidity and air temperature combination sensor

05.02.2018

Engine

457, 924, 926 in model 693, 694, 695

Engine

457, 926 in model 693, 695, 934, 958

Engine

460.984 in model 934, 938

Engine

924 in model 979

Engine

924, 926 in model 958, 979

Remove/install SCR air humidity and air temperature combination sensor

Represented on vehicle 958

1

Air inlet tube

2

Fastening bolt

B132

Air temperature and humidity combined sensor

W14.40-1244-06

Remove/install SCR air humidity and air temperature combination sensor

Represented on vehicle 979

1

Air inlet tube

2

Fastening bolt

B132

Air temperature and humidity combined sensor

B14.40-0129-06

Remove/install

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

Warning

Risk of injury caused by pinching and crushing when opening and closing engine hood

No one should be within the swivel range of the engine hood as it is being opened or closed. Always open engine hood all the way to the end position until this engages in the front locks.

AS88.40-Z-0001-01A

1

Turn off ignition

Topical note

Notes on tilting the cab

.

AH60.80-N-0003-01A

2

Tilt the cabin

Only for the vehicles 958, 979

3

Tilt the hood

Only for the vehicles 693, 694, 695.

4

Loosen the electric connection from the combined sensor (B132)

5

Remove the combined sensor (B132)

Engines 924.9 and 926.9.SCR combined sensor of air humidity and temperature in the fresh air pipe

*BA14.40-B-1024-02B

Engines 457.9 and 460.9.Combined sensor of air humidity and temperature SCR

*BA14.40-B-1024-02C

6

Install on the reverse order

Exhaust gas after-treatment

Number

Designation

Engine 924.9, 926.9 except Liquid Only

BA14.40-B-1024-02B

SCR combined sensor of air humidity and temperature in the fresh air pipe

Nm

7

Exhaust gas after-treatment

Number

Designation

Engine 457.9; 460.984 except Liquid Only

BA14.40-B-1024-02C

Combined sensor of air humidity and temperature SCR

Nm

7

Documenti citati