ar0716w100502md

Set engine to TDC of cylinder 1 and block

Típus ar · téma 07.16 · verzió 0201 · 2016-04-11

Érvényes: Engine 934.9, 936.9

„hu” nyelven nem érhető el; megjelenítve: Angol.

Elhelyezkedés

Funkciócsoport 1 Motor › 07 Keverékképzés › 07.16 Common-Rail dízel befecskendezőrendszer — 934 sorozat (modellek: 9**) · 936 sorozat (modellek: 9**)

EinPAS 15 Motor › 15.15 Komplett belsőégésű motor/motorház/forgattyús hajtómű › 15.15.15 Komplett belsőégésű motor — 934 sorozat (modellek: 9**) · 936 sorozat (modellek: 9**)

AR07.16-W-1005-02MD

Set engine to TDC of cylinder 1 and block

Engine

934.9, 936.9

Set engine to TDC of cylinder 1 and block
Set engine to TDC of cylinder 1 and block

904 589 04 63 00

Turning device

936 589 00 15 00

Drift

Set engine to TDC of cylinder 1 and block

1

Turn flywheel (1) or ring gear carrier with the turning device until the marking (arrow B) on flywheel or ring gear carrier (1) is in line with the index mark (arrow A) on flywheel housing (2).


W05.10-1017-02

Set engine to TDC of cylinder 1 and block

2

Disconnect electrical connection (7) on crankshaft position sensor (B600).



3

Remove screw/bolt and take crankshaft position sensor (B600) out of the flywheel housing (2).



4

Insert drift (8) into the flywheel housing (2) and lock flywheel or ring gear carrier (1).


The pin in drift (8) must sit in the bore (arrow E) in the flywheel or ring gear carrier (1).


W05.10-1019-06