Serije
hr
ar6000p070001fa
Gap dimensions on hoods, doors and lids
Vrsta ar · tema 60.00 · verzija 0105 · 2014-10-16
Vrijedi za: MODEL 210.2
Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.
Smještaj
Funkcijska skupina 3 Nadgradnja › 60 Nadgradnja Opšte › 60.00 Opšte — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.30 Cab — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.40 Front door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.41 Center door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.43 Rear-end door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.44 Sliding door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.45 Driver door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.46 Rear door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.47 Emergency door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.48 Lift door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.49 Luggage compartment door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.30 Engine hood — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.31 Front-end flap — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.33 Liftgate/trunk lid — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.34 Fuel filler flap/socket flap — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.60 Maintenance flap/service flap — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.61 Luggage compartment door — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.51 Passenger door 1 › 35.51.32 Door leaf/door frame — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.52 Passenger door 2 › 35.52.32 Door leaf/door frame — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.53 Passenger door 3 › 35.53.32 Door leaf/door frame — Serija 210 (modeli 2**)
EinPAS 35 Body/frame/detachable parts › 35.54 Passenger door 4 › 35.54.32 Door leaf/door frame — Serija 210 (modeli 2**)
AR60.00-P-0700-01FA
Gap dimensions on hoods, doors and lids
Model 210.2
Test and adjustment values for gap dimensions at hoods, doors and covers
Number
Designation
MODEL 210.2
BE60.00-P-1001-01A
Gap dimension
Engine hood to fender
Dimension "A"
mm
4,0 ( 0,5)
Engine hood to headlamp
Dimension "R"
mm
–
Engine hood to radiator grille
Dimension "O"
mm
–
Radiator grille to headlamp
Dimension "N"
mm
–
For picture, see
AR60.00-P-0700-01FA
Test and adjustment values for gap dimensions at hoods, doors and covers
Number
Designation
MODEL 210.2
BE60.00-P-1002-01A
Gap dimension
Front door to A-pillar
Dimension "B"
mm
6,5 ( 0,5)
Front door to fender
Dimension "H"
mm
4,5 ( 0,5)
Front door to rear door
Dimension "I"
mm
5,5 ( 0,5)
Front door to roof
Dimension "C"
mm
6,5 ( 0,5)
Rear door to side section, top
Dimension "D"
mm
–
Rear door to side section, bottom
Dimension "J"
mm
4,0 ( 0,5)
Fender to A-pillar
Dimension "Q"
mm
–
Front door to rear fender
Dimension "P"
mm
–
For picture, see
AR60.00-P-0700-01FA
Test and adjustment values for gap dimensions at hoods, doors and covers
Number
Designation
MODEL 210.2
BE60.00-P-1004-01A
Gap dimension
Rear-end door to roof
Dimension "E"
mm
5,0 ( 0,5)
Rear-end door to D-pillar
Dimension "F"
mm
–
Rear-end door to D-pillar
Dimension "G"
mm
–
Rear-end door to rear fender
Dimension "M"
mm
4,5 ( 0,5)
For picture, see
AR60.00-P-0700-01FA
Test and adjustment values for gap dimensions at hoods, doors and covers
Number
Designation
MODEL 210.2
BE60.00-P-1005-01A
Gap dimension
Fuel filler flap
Dimension "K"
mm
4,0
For picture, see
AR60.00-P-0700-01FA
Dimension "L"
mm
4,5
1
Adjust hoods, doors and lids as shown in drawing .
The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap should be max. 0.5 mm over the entire length. If the inside clearance is too large or too small, the movable body parts must be centered accordingly. The reference measurements apply only for repair work on bodies damaged in accidents.
