Serije
hr
ar4330g0071oha
Remove/install temperature sensor of hydrodynamic retarder
Vrsta ar · tema 43.30 · verzija 0100 · 2017-02-04
Vrijedi za: Model 000.001 with transmission 714.140/143 Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx
Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.
Smještaj
Funkcijska skupina 2 Donji postroj › 43 Kočnice-Pneumatika i dodatne kočnice › 43.30 Retarder (hidraulični) — Serija 000 (modeli 001)
EinPAS 21 Brakes/vacuum system/compressed-air system › 21.21 Retarder › 21.21.12 Sensor/switch/wiring harness — Serija 000 (modeli 001)
Vrijedi i za motore/mjenjače: 714 140, 714 143
AR43.30-G-0071OHA
Remove/install temperature sensor of hydrodynamic retarder
22.01.2017
Model
000.001 with transmission 714.140/143
Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx
1
Electrical wiring harness
2
Temperature sensor
3
Sealing ring
Information on preventing damage to electronic components due to electrostatic discharge
AH54.00-P-0001-01A
Remove/install
1
Switch off ignition
2
Detach plug of electrical wiring harness (1) from temperature sensor (2)
Danger !
Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure
Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder.
AS43.30-Z-0001-01A
3
Remove temperature sensor (2) from hydrodynamic retarder
Removal: Collect escaping oil in a suitable container.
Installation: Replace the sealing ring (3).
4
Install in the reverse order
Check
5
Check and correct oil level in hydrodynamic retarder
AP43.30-G-4304OHA
Povezani dokumenti
