ar4330g0004oha

Inspect shaped breather

Vrsta ar · tema 43.30 · verzija 0100 · 2017-02-04

Vrijedi za: Model 000.001 with transmission 714.140/143 Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 2 Donji postroj › 43 Kočnice-Pneumatika i dodatne kočnice › 43.30 Retarder (hidraulični) — Serija 000 (modeli 001)

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.21 Retarder › 21.21.30 Housing/cap/shaft/retarder — Serija 000 (modeli 001)

Vrijedi i za motore/mjenjače: 714 140, 714 143

AR43.30-G-0004OHA

Inspect shaped breather

22.01.2017

Model	000.001 with transmission 714.140/143
	Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx

Inspect shaped breather

1	Valve insert
2	Float
3	Test ring

W43.30-1060-01

	Check
1	Remove profile ventilation		AR43.30-G-0003OHA
2	Check float (2) for surface damage (arrow)	If there are problems
		
		Replace the complete profile ventilation.
3	Weigh float (2) using a suitable digital scale and compare with specified value	Specified value for float weight	*BE43.30-N-1004-01B
		If this is not the case
		
		Replace the complete profile ventilation.
4	Place valve element (1) on float (2), weight it with test ring (3) and fill cavity between float (2) and upper edge of valve element with commercially available spirit	 Commercially available devices/tools Test ring (3) Order number H67.2757xx Voith D-74564 Crailsheim
		If the fluid level changes within one minute.
		
		Replace the complete profile ventilation.
5	Install profile ventilation		AR43.30-G-0003OHA

Check values for retarder/hydrodynamic retarder, hydraulic

Number	Designation		Model 000.001 with transmission 714.140/143 Transmission with hydrodynamic retarder
BE43.30-N-1004-01B	Specified value for float weight	g	11 (1)

Povezani dokumenti

ar4330g0003oha