ar8325p1402gq

Remove/install water collector

Tyyppi ar · aihe 83.25 · versio 0104 · 2017-12-29

Koskee: Model 166 Model 292

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 83 Lämmitys, tuuletus ja ilmastointi › 83.25 Lämmitysautomatiikka — Mallisarja 166 · Mallisarja 292

EinPAS 35 Kori/runko/liittyvät osat › 35.38 Puskuri/spoileri/ulkoverhous/säilytyslaatikko/etusuoja › 35.38.44 Verhous/somiste-elementti/etusuoja — Mallisarja 166 · Mallisarja 292

AR83.25-P-1402GQ

Remove/install water collector

13.12.2017

Model

166

Model

292

Remove/install water collector

Shown on model 166.0 except code 874 (MAGIC VISION CONTROL, heated)

1

Wiper arms

5

Bolts

6

Cooling duct

7

Washer fluid hose

8

Air-water duct

P83.25-2416-04

Remove/install water collector

Shown on washer fluid hose of model 166 with code 874 (MAGIC VISION CONTROL, heated)

9

Covers

10

Washer fluid hoses with electrical wiring harness

11

Bracket

P83.25-2446-05

Warning

Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.

When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).

AS82.30-Z-0001-01A

Remove/install

1

Remove wiper arms (1)


Model 166 as of 8/25/11, 292
with code 874 (MAGIC VISION CONTROL, heated)

AR82.30-P-6100GQA

Model 166 as of 8/25/11, 292
except code 874 (MAGIC VISION CONTROL, heated)

AR82.30-P-6100GQB

Model 166 up to 8/24/11

AR82.30-P-6100GZ

2

Remove water deflector at left and right

AR88.85-P-2100RT

3

Unscrew bolts (5) and remove cooling duct (6)

4.1

Release air/water duct (8) far enough from the windshield to gain access to the washer fluid hose (7)

Model 166, 292
except code 874 (MAGIC VISION CONTROL, heated)

Installation: Coat upper edge of air/water duct (8) and the lower edge of the windshield with lubricant.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

4.2

Lift up air/water duct (8) far enough until the washer fluid hose with electrical wiring harness (10) is accessible

Model 166, 292
with code 874 (MAGIC VISION CONTROL, heated)

5.1

Unclip covers (9), remove holders (11) from air/water duct (8) and place the washer fluid hose with electrical wiring harness (10) to one side. Remove air/water duct (8)

Model 166, 292
with code 874 (MAGIC VISION CONTROL, heated)

5.2

Remove washer fluid nozzles with washer fluid hose (7) from air/water duct (8) and air/water duct (8)

Model 166, 292
except code 874 (MAGIC VISION CONTROL, heated)


Do not detach washer fluid hose (7) from washer fluid nozzles.
Otherwise, the washer fluid nozzles break off.

The washer fluid nozzles and washer fluid hose (7) form a unit up to the washer fluid reservoir.

6

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67

Viitatut asiakirjat