1 | Cable slack adjuster adjusting nut |
S42.20-4533-11
61 | Brake disk |
105a | Thumbwheel |
P42.20-2141-04
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
| Remove | ||
1 | Release parking brake | ||
2 | Raise vehicle | ||
3.1 | Remove one wheel bolt from each rear wheel | Model 447.6/7 | |
3.2 | Remove rear road wheels | Model 447.6/7 | |
4 | Loosen counternut of cable slack adjuster adjusting nut (1) a few turns | If installed. | |
5 | Loosen cable slack adjuster adjusting nut (1) | ||
Adjust | |||
6 | Adjust parking brake | Turn the adjustment wheel (105a) until the wheel or the brake disk (61) locks. Then turn the adjustment wheel (105a) by 9 teeth in the opposite direction. The wheel freewheel must be guaranteed in the process. | |
If necessary | |||
| |||
Turn the wheel or brake disk (61) slightly until the adjustment wheel (105a) is accessible through the threaded hole. | |||
7 | Adjust rear brake cables | ||
| 000 588 05 21 00 Roller brake test stand | ||
Force on parking brake pedal at first notch | |||
8 | Retighten counternut of cable slack adjuster adjusting nut (1) | If installed. | |
| Install | ||
9.1 | Screw in wheel bolts and tighten | Model 447.6/7 | |
Steel rim wheel bolt | |||
9.2 | Fit rear wheels | Model 447.6/7 | |
| Check | ||
10 | Check that parking brake is functioning correctly | ||
| |||
Depending on findings | |||
| |||
Repeat adjustment procedure. |
Viitatut asiakirjat
- ah0060n010001a Ohjeita auton nostamiseen ja nostamiseen pukeille
- ap4200s4290e Jarrutesti
- ar0060s1000e
- ar4010s1100e
- ar4220s054001e
- as0000z001001a Hengenvaara: Auto saattaa pudota tai kipata nosturilta
- ws4200p0006b