D26.60-0003-06
1 Protective cap
2 Lower part of the shift lever
3 Cylinder pin
4 Reversing lamp switch
7 Backup lamp switch actuation thrust piece
11 Guide sleeve
12 Compression spring
13 Screw plug
14 Spacer washer
| Removing | ||
1 | Remove shift lever | ||
2 | Remove lower part of the shift lever (2) | ||
3 | Remove backup lamp switch (4) | ||
4 | Remove backup lamp switch actuation thrust piece (7) | ||
| Partially reduced backup lamp switch actuation unit | ||
5 | Remove screw plug (13) | ||
6 | Remove compression spring (12), guide sleeve (11) and shim (14) | ||
| Checking | ||
7 | Check all parts for wear | ||
| Install | ||
8 | Install lower part of the shift lever (2) | ||
Adjust | |||
9 | Adjust shift gate play | ||
Screw plug, lower part of the shift lever | |||
10 | Insert required shim (14), guide sleeve (11) and compression spring (12) | ||
11 | Screw in screw plug (13) and tighten | Coat screw plug with sealant. | |
Screw plug, lower part of the shift lever | |||
12 | Insert backup lamp switch actuation thrust piece (7) | ||
| Partially reduced backup lamp switch actuation unit | ||
13 | Install backup lamp switch (4) | ||
Reverse lamp switch to transmission housing | |||
14 | Install gearshift lever |
Transmission housing
Number | Designation | Trans-mission | Trans-mission | |
BA26.40-N-1004-01A | Reverse lamp switch to transmission housing | Nm | 40 | 40 |
Shift mechanism
Number | Designation | Trans-mission 711.603 | Trans-mission 711.612 | Trans-mission 711.613 | ||
BA26.60-N-1004-01A | Screw plug, lower part of the shift lever | Nm | 60 | 60 | 60 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1012-01A | Omnifit FD 3041 sealant | A 002 989 47 20 10 |