si3500s0003a

Service Information: Changed repair method for rear spring, rear axle semi-trailing arm, rear axle shaft and differential

Type si · topic 35.00 · version 0100 · 2007-07-25

Applies to: MODEL 639

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.00 General — Series 639

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.40 Transverse control arm/control arm/stabilizer bar — Series 639

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.51 Axle shaft/drive shaft — Series 639

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Series 639

EinPAS 20 Chassis › 20.16 Suspension › 20.16.30 Spring/air suspension bellows/shock absorber/suspension strut — Series 639

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 639

SI35.00-S-0003A

Service Information: Changed repair method for rear spring, rear axle semi-trailing arm, rear axle shaft and differential

19.7.07

MODEL 639

A new repair method has been developed for the removal and installation of rear springs, rear axle semi-trailing arm, rear axle shafts and differential by the ongoing further development of the repair methods.

With this new repair method it is no longer necessary to loosen the rear shock absorber for the removal of the rear springs. Removal of the rear axle semi-trailing arm and a wheel alignment check is no longer necessary for the removal of the rear axle shafts or the differential.

In the event of complaints these new repair methods are to be used on the rear axle with immediate effect.

The corresponding documentation of the new repair methods is already taken care of in the WIS net.

The flat rates were published with release 07/2007.

Remove/install rear spring

Model 639 except code (CL0) Lowering and raising rear air suspension

AR32.20-S-0230S

Remove/install rear axle semi-trailing arm

Model 639

AR35.25-S-2200S

Remove/install rear axle shaft

Model 639

AR35.30-S-0620S

Remove/install rear axle differential

Model 639

AR35.31-S-0520S

Referenced documents