gf8310d2010ht

Rear heater ventilation function

Type gf · topic 83.10 · version 0100 · 2006-05-30

Applies to: MODEL 906.611 /613 /631 /633 /635 /637 /653 /655 /657 /711 /713 /731 /733 /735 with CODE (H13) Additional heat exchanger in load compartment with CODE (HH9) Regulated air conditioning (Tempmatic)

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 906 (models 611, 613, 631, 633, 635, 637, 653, 655, 657, 711, 713, 731, 733, 735)

GF83.10-D-2010HT

Rear heater ventilation function

12.5.06

MODEL 906.611 /613 /631 /633 /635 /637 /653 /655 /657 /711 /713 /731 /733 /735
with CODE (H13) Additional heat exchanger in load compartment
with CODE (HH9) Regulated air conditioning (Tempmatic)

Rear heater ventilation function

D83.10-1156-11

47 Intake air duct

48 Outlet air duct

A32/1 Rear heater/air conditioner air recirculation unit

Rear heater ventilation function

D83.40-1114-11

S98 AAC [KLA] control and operating unit

S98s2 Rear blower control button (+)

S98s3 Rear blower control button (-)

S98s7 Rear air conditioning button

The rear heater ventilation can only be controlled using the rear blower control button (+) and the rear blower control button (-) integrated in the AAC [KLA] control and operating unit if it is switched on using the rear air conditioning button integrated in the AAC [KLA] control and operating unit.

Activation of the rear heater is indicated by illumination of the red light emitting diode (LED) in the rear air conditioning button.

The ventilation ensures circulation the recirculated air (air circulation) and also ensures that homogeneous and pleasant temperatures are provided in the passenger or load compartment of the vehicle.

Ventilation is only provided in air recirculation mode, no fresh air is drawn in.

-----------------------------------------------------------------------------------------

The rear heater blower motor (A32/1m1) takes in the recirculated air from the passenger or load compartment of the vehicle via the intake air duct. The rear blower control button (+) and the rear blower control button (-) are used to control the rate of circulation of the recirculated air with the help of the rear heater blower motor.

The AAC [KLA] control and operating unit controls the rear heater blower regulator (A32/1a1). The rear heater blower regulator regulates the voltage applied at the rear heater blower motor. The rear blower control button (+) and the rear blower control button (-) can be used to adjust the output of the rear heater blower motor in the following stages via the rear heater blower regulator:

Stage 1

Stage 2

Stage 3

-----------------------------------------------------------------------------------------

The rear heater blower motor cannot be switched off using the rear blower control button (+) and the rear blower control button (-). The rear heater blower motor can only be switched off by switching off the rear heater using the rear air conditioning button.

The recirculated air is distributed only in the footwell area via the outlet air duct towards the outlet opening in the bottom left front side panel behind the driver seat.

Rear blower regulator, component description

GF83.10-D-4150H

Rear blower motor, component description

GF83.10-D-4160H

Rear heater housing, component description

GF83.20-D-4035H

Tempmatic (TM) control and operating unit, component description

GF83.40-D-4015H

Referenced documents