GF46.15-P-3002PP | Steering column adjustment normalization, function | 2.2.04 |
MODEL 203.0 /2 /7
with CODE (275) Electrically adjustable driver seat, steering column and outside mirrors with memory
with CODE (242) Electrically adjustable front passenger seat with memory
up to Model Year 8
Normalizing
Normalization is important for the assignment between the absolute adjustment position and the position recorded by the driver-side front seat adjustment control unit with memory (N32/1).
Normalization must be performed during initial start-up or in a denormalized condition.
The following steering column stops must be approached for the normalizing process:
Steering column height adjustment: lower stop position
Steering column longitudinal adjustment: front stop position
Operating procedure
Press the steering column up/down and forward/back switch (S91/2s13) (up to 30.6.02) or steering column adjustment switch (S59) (as of 1.7.02) until the mechanical stop is approached and keep pressed for a further 0.25 seconds.
Renormalization
Renormalization takes place if one of the two above-mentioned stop positions is moved to in a normalized state.
Denormalization
Denormalization takes place:
the battery is disconnected (G1) or
the mechanical stop is exceeded.
Referenced documents
- gf4615p4103pp Steering column adjustment motor group, location/task
- gf4615p5001pa Steering column adjustment switch, location / task
- gf4615p5001pp Steering column adjustment switch, location / task
- gf9129p2106pp Left front seat adjustment control unit with memory location/task