Check values for cylinder crankcase |
Number | Designation | ENGINE 601, 602.91/96, 603.91/96 | ENGINE 603.97 | ||
BE01.40-P-1001-02D | Crankshaft bearing | Basic bore diameter | mm | 62,500...62,519 | 62,500...62,519 |
Basic bore width at fitted bearing | mm | 19,979...20,000 | 19,979...20,000 | ||
Permissible out-of-roundness and taper of basic bore | mm | 0,02 | 0,02 | ||
BE01.40-P-1002-02D | Height of cylinder crankcase from center of basic bearing bore (H) | When new | mm | 234,95...235,03 | 234,95...235,03 |
After machining | mm | 234,60 | 234,60 | ||
For picture, see | |||||
BE01.40-P-1003-02D | Height of cylinder crankcase (H1) | mm | 299,62 | 299,62 | |
For picture, see | |||||
BE01.40-P-1004-02D | Height up to center of basic bearing bore (H2) | mm | 65,02...64,98 | 65,02...64,98 | |
For picture, see | |||||
BE01.40-P-1005-02D | Cylinder crankcase | Peak-to-valley height (RZ) of upper contact surface | mm | 0,012 | 0,012 |
Wave depth (Wₜ) of upper contact surface | mm | 0,009...0,012 | 0,009...0,012 | ||
Unevenness of contact surface in longitudinal direction | mm | 0,03 | 0,03 | ||
Unevenness of contact surface in transverse direction | mm | 0,03 | 0,03 | ||
Deviation in parallelism of top contact surface to bottom in longitudinal direction | mm | 0,05 | 0,05 | ||
BE01.40-P-1006-02D | Chamfer for cylinder bore on contact surface of cylinder crankcase | mm | 0,6-175° | 0,6-175° | |
BE01.40-P-1007-02D | Bore dia. for cylinder liner in cylinder crankcase | D2 | mm | 90,000...90,035 | 91,500...91,535 |
For picture, see | |||||
BE01.40-P-1008-02D | Bore dia. for cylinder liner collar in cylinder crankcase | D1 | mm | 90,55...90,65 | 92,00...92,20 |
D | mm | 92,65...92,75 | 94,15...94,25 | ||
For picture, see | |||||
BE01.40-P-1009-02D | Liner seat up to center of basic bearing bore (T) | mm | 231,0...231,2 | 231,0...231,2 | |
For picture, see | |||||
BE01.40-P-1010-02D | Depth of cylinder liner seat (T1) | mm | 1,0...1,2 | 1,0...1,2 | |
For picture, see | |||||
BE01.40-P-1011-02D | Chamfer for cylinder bore on bottom cylinder runout | mm | 1,520° | 1,520° | |
BE01.40-P-1012-02D | Land width and peak-to-valley height between the cylinder bores after machining the cylinder bore | Land width (M) | mm | 35 | 35 |
Peak-to-valley height (Rz) | mm | 0,100 | 0,100 | ||
For picture, see | |||||