Test values for the cylinder liner |
Number | Designation | ENGINE 476.93 | ||
BE01.40-B-1001-03F | Cylinder liner internal diameter | Letter B | mm | 127,990...127,995 |
Letter C | mm | 127,995...128,000 | ||
Letter D | mm | 128,000...128,005 | ||
Letter E | mm | 128,005...128,010 | ||
BE01.40-B-1002-03F | Maximum permissible wear in the slipping surface of the cylinder liner | Measured at top reversing point of first piston ring | mm | 0,08 |
BE01.40-B-1003-03F | Roundness and taper on the slipping surface of the cylinder liner | mm | 0,015 | |
BE01.40-B-1004-03F | Liner collar height | mm | 9,90...9,92 | |
BE01.40-B-1005-03F | Distress on the lower face of the liner collar (mating surface with wire ring) | contact surface | mm | 0,02 |
BE01.40-B-1006-03F | Metal ring thickness | Normal | mm | 0,14...0,16 |
Normal I | mm | 0,48...0,52 | ||
BE01.40-B-1007-03F | Distance of the outer upper face of the liner above the block surface | Liner installed | mm | 0,03...0,13 |
BE01.40-B-1008-03F | Difference between the four measuring points | contact surface | mm | 0,02 |
BE01.40-B-1009-03F | Maximum permissible cylinder liner inside out of round in the O-rings area | Liner installed | mm | 0,04 |