ar9121d4030ec

Remove/install backrest fitting

Type ar · topic 91.21 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.42 Seat backrest/head restraint — Series 903 (models 6**)

AR91.21-D-4030EC

Remove/install backrest fitting

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Remove/install backrest fitting

D91.12-1109-06

1 Bolts

2 Backrest fittings

 	Remove/install
 Danger!	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Remove bench seat back bolster		AR91.21-D-4495EC
2	Remove bench seat bolster		AR91.21-D-4505EC
3.1	Remove side paneling, right from bench seat housing	Only when removing right backrest fitting (2)	AR91.21-D-5746EC
4	Remove seat belt buckle	 Only on the side on which the backrest fitting (2) is to be removed.	AR91.40-D-1517EC
		Bolt, belt buckle to rear seat	*BA91.40-N-1010-01A
5	Remove bolts (1)
6	Detach relevant backrest fitting (2)
7	Install in the reverse order

 Seat belts/emergency tensioning retractors

Number	Designation			Model 903.662 with code ZL9


BA91.40-N-1010-01A	Screws for seat belt buckle on rear seat		Nm	38

Referenced documents

ar9121d4495ec Remove/install bench seat back bolster
ar9121d4505ec Remove/install bench seat seat bolster
ar9121d5746ec Remove/install paneling at right side of bench seat housing
ar9140d1517ec Remove/install seat belt buckle
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.