ar9121d4495ec

Remove/install bench seat back bolster

Type ar · topic 91.21 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.42 Seat backrest/head restraint — Series 903 (models 6**)

AR91.21-D-4495EC

Remove/install bench seat back bolster

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Remove/install bench seat back bolster

D91.21-0002-06

1 Back bolster

2 Bolts

4 Bolts

 	Remove/install
 Danger!	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Remove bench		AR91.21-D-4000EC
2	Fold armrest up
3	Detach side bolster fitting (arrows) and push to side
4	Unscrew bolts (2)
5	Unscrew bolts (4) on rear of back bolster (1)
6	Remove back bolster (1)
7	Install in the reverse order

Referenced documents

ar9121d4000ec Remove and install bench
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.