Remove and install cover on rear seat cushion

AR91.18-P-1850FF

Remove and install cover on rear seat cushion

2.3.04

 

Remove/Install

1

Remove rear bench seat

AR91.21-P-4000FF

2.1

Remove adjustment lever (2)

On vehicles with code (S33) Double folding rear bench seat (3 seats)

AR91.21-P-4050FF

3.1

Remove safety strap (3) from bench seat

On vehicles with code (S33) Double folding rear bench seat (3 seats)

4

Move rear seat backrest (7, 8) to vertical position

5

Remove paneling of release lever from rear seat backrests (7, 8)

AR91.12-P-1735FF

6

Separate terminal strip cover (13) and terminal strip covering (14) from each other by twisting

7

Unhook cover (5) on side (arrows) of seat cushion frame (4)

8

Feed terminal strip cover (13) in between rear seat cushion and rear seat backrests (7, 8)

9

Unhook hook (6) on side of seat cushion frame (4)

10

Unzip the zipper (9)

 Installation: Fold down rear bench seat and close zipper (9), starting in the middle, moving first to the right and then to the left using the pliers (10).



*454589013700

11

Unhook hook of cover (5) from seat frame

12.1

Unscrew nut (11) and remove belt end fitting (12)

On vehicles with code (S33) Double folding rear bench seat (3 seats)



*BA91.40-P-1007-01J

13

Remove cover (5) with foam section. In doing so, guide seat belt buckles through the openings in the cover (5)

 Installation: Pay attention to installation position of seat belt buckles.

14

Remove cover (5) from foam section

AR91.18-P-1820-03FH



*454589023700

15

Install in the reverse order

Number

Designation

Model
454.0

BA91.40-P-1007-01J

Bolt for belt end fitting to bench seat

Nm

45