ar9112p1735ff

Remove/install trim cover for rear seat backrest release lever

Type ar · topic 91.12 · version 0100 · 2004-04-20

Applies to: MODELS 454.0

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.12 Rear seats — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.70 Trim/stowage — Series 454 (models 0**)

AR91.12-P-1735FF

Remove/install trim cover for rear seat backrest release lever

17.3.04

MODELS 454.0

Remove/install trim cover for rear seat backrest release lever

P91.12-2683-04

1 Release lever

2 Screw

3 Panel

4 Panel

 	Remove/Install
1	Fold down both rear seat backrests	 See Operating Instructions
2	Pry off the release lever (1) off with a suitable screwdriver	 Installation: Install new release lever (1).
3	Unscrew screw (2)
4	Detach trim cover (3) from trim cover (4)
5	Fold both rear seat backrests back up	 See Operating Instructions
6	Detach and remove the trim cover (4) at the backrest frame	 Installation: Make sure the trim cover (4) engages at the backrest frame.
7	Install in the reverse order