ar8840d3000sd

Remove/install engine hood

Type ar · topic 88.40 · version 0104 · 2011-07-06

Applies to: MODEL 900, 906

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.40 Engine hood, front flap — Series 900 · Series 906

EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.30 Engine hood — Series 900 · Series 906

AR88.40-D-3000SD

Remove/install engine hood

28.6.11

MODEL 900, 906

Remove/install engine hood

D88.40-1126-08

1 Engine hood

3 Hood prop

2 Nuts

 	Remove/install
 Danger!	Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof	Keep body parts and limbs well clear of moving parts.	AS00.00-Z-0011-01A
1	Open engine hood (1)
2	Unscrew bolt (arrow) from engine hood prop (3)	 Support engine hood (1) Otherwise the engine hood (1) can damaged adjacent components or the engine hood (1) when falling down.
		 Aid of helper required.
			*BA88.40-N-1008-01A
3	Mark position of hood hinge on engine hood (1).	 Installation: Check gap and height offset of engine hood (1), adjust if necessary. 
		Adjust engine hood	AR88.40-D-3020H
4	Unscrew nuts (2) and remove engine hood (1)	 Carefully lay down engine hood (1). Otherwise paint damage can occur.
		 Aid of helper required.
		 Installation: Repair paint damage on nuts (2) with suitable touch-up paint pen.
		 Installation: When replacing engine hood (1) apply cavity wax for preservation after painting: 
		Cavity preservation following repair work	AR97.20-D-1500H
			*BA88.40-N-1001-01A
			*BA88.40-N-1005-01A
5	Disassemble engine hood (1)	When replacing engine hood (1).	AR88.40-D-3002H
		 Installation: When replacing engine hood (1) install detachable parts after painting:
6	Install in the reverse order

 Engine hood

Number	Designation		Model 900	Model 906


BA88.40-N-1001-01A	Collar nut, engine hood to hinge	Nm	20	20
BA88.40-N-1005-01A	Bolt, engine hood catch top section to engine hood	Nm	10	10
BA88.40-N-1008-01A	Bolt, hood prop to side piece	Nm	8	8

Referenced documents

ar8840d3002h Disassemble/assemble engine hood
ar8840d3020h Adjust engine hood
ar9720d1500h Cavity preservation following repair work
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.