ar8370s5652sa

Remove/install fuel metering pump

Type ar · topic 83.70 · version 0103 · 2011-10-12

Applies to: MODEL 639.711 /713 /813 with CODE (HZ1) Auxiliary heater (warm air)

Where it sits

Function group 3 Body › 83 Climate control › 83.70 Auxiliary/supplementary heater — Series 639 (models 711, 713, 813)

EinPAS 39 Heating/ventilation/cooling › 39.25 Stationary heater/auxiliary heater › 39.25.46 Pump/container — Series 639 (models 711, 713, 813)

AR83.70-S-5652SA

Remove/install fuel metering pump

6.10.11

MODEL 639.711 /713 /813 with CODE (HZ1) Auxiliary heater (warm air)

Remove/install fuel metering pump

N83.70-2098-09

1 Hose clamps

2 Fuel line

M46/1 STH fuel metering pump

3 Electrical connector

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Danger!

Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

1

Disconnect fuel line (2) on both sides from STH fuel metering pump (M46/1)

Slacken hose clamps (1). Catch the fuel leaking in a suitable container; plug both sides of the fuel line (2).

Set of stop plugs

*129589009100

2

Disconnect electrical connector (3) of STH fuel metering pump (M46/1)

3

Remove STH fuel metering pump (M46/1)

4

Install in the reverse order

Checking

5

Perform function test

Check stationary heater for heating effect.

Remove/install fuel metering pump

Set of stop plugs

129 589 00 91 00

Referenced documents