AR83.25-D-1000C | Remove/install heater housing | 15.7.99 |
MODELS 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"
D83.25-1107-06
1 Heater housing
2 Connector
3 Lead
4 Connector
5 Screw
Modification notes
| Remove/Install | ||
1 | Disconnect ground cable of battery | ||
2.1 | Remove cover of radio installation slot | With code ER0, radio pre-installation. Unclip electrical leads from cover | |
2.2 | Remove radio | With code EF5, EF6 or EF7, sound 10, 20 or 30 radio. | |
3 | Remove glove compartment | ||
4.1 | Remove stowage compartment below pen holder | Except for code J19/J28, tachograph. | |
4.2 | Remove tachograph | With code J19/J28, tachograph. | |
5 | Remove cover in instrument cluster | ||
6 | Remove instrument cluster | ||
7.1 | Remove stowage compartment above glove compartment | Except code SA6, front passenger airbag. | |
7.2 | Remove front passenger airbag unit | With code SA6, front passenger's airbag. | |
8.1 | Remove cover for air nozzle on passenger side | With code SA6, front passenger's airbag. | |
9 | Remove loudspeaker | ||
10 | Remove cover on center part of instrument panel | ||
11 | Remove air conditioning pushbutton control module | ||
Installation: If control cables for air distribution have been removed: | |||
Adjusting air distribution duct cables. | |||
12 | Remove drawer | ||
13 | Remove top part of instrument panel | ||
14 | Remove central electric unit | ||
15 | Remove air nozzles in instrument panel | ||
16 | Remove instrument panel | ||
17 | Detach ventilation box and put down on engine | ||
18 | Position suitable catch reservoir for coolant below vehicle | ||
19 | Remove connections from heater at front | ||
20 | Remove air ducts | ||
21 | Disconnect connector (2) from exit temperature sensor | ||
22 | Expose lead (3) and disconnect | ||
23 | Unscrew screws (5) | ||
24 | Remove heater housing (1) | Installation: Ensure that line (3) to ventilation box is routed properly. Check air outlet and Check air intake openings, replace if necessary. | |
25 | Install in the reverse order | ||
26.1 | Set time on instrument cluster | Except for code J19/J28, tachograph. | |
27.1 | Set time on timer for auxiliary heater | With code H12, hot water auxiliary heater or H86, timer for auxiliary heater. | |
28 | If necessary, code radio | ||
29 | Read out DTC memory | If necessary, delete DTC memory. |
Referenced documents
- ar5425d1382a Remove/install electrical center
- ar5430d0001a Remove/install tachograph
- ar5430d6015c Removing and installing instrument cluster
- ar6810d1000a Remove/install instrument panel
- ar6810d1020b Remove/install upper section of instrument panel
- ar6810d1090a Remove/install air nozzle cover on passenger side
- ar6810d1110a Remove/install air nozzles in instrument panel
- ar6810d1190a Removing and installing cover on instrument panel center section
- ar6810d1195a Removing and installing drawer in instrument panel
- ar6810d1515a Remove/install stowage compartment above glove compartment
- ar6810d1550a Remove/install cover on instrument cluster
- ar8260d7502a Remove/install radio
- ar8262d7833a Removing and installing loudspeaker in instrument panel
- ar8310d001003a Detach/attach ventilation box
- ar8310d140001a Adjust air distribution control cables
- ar8325d100001b Remove and install connections from and to front of heater housing
- ar8325d100002a Remove air ducts
- ar8325d1124a Remove and install air conditioning pushbutton control module
- ar9160d0680b Remove/install passenger airbag unit