ar8262d7833a

Removing and installing loudspeaker in instrument panel

Type ar · topic 82.62 · version 0105 · 2003-09-15

Applies to: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.62 Loudspeakers, amplifiers, antennas — Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

EinPAS 31 Communication/information/entertainment › 31.75 Audio playback/audio output › 31.75.16 Speaker — Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

AR82.62-D-7833A

Removing and installing loudspeaker in instrument panel

8.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Removing and installing loudspeaker in instrument panel
Removing and installing loudspeaker in instrument panel

D82.62-1101-01

1 Edge guard

2 Loudspeaker cover

3 Loudspeaker

4 Electrical connections

D82.62-1102-01

Remove/install

1

Pull off edge guard (1) in area of A-pillar

2

Remove panelings of A-pillar

Unclip top paneling and pull out upward

3

Remove loudspeaker covers (2)

Unclip outer covers and pull off in direction of A-pillar

4

Unclip loudspeaker (3)

Installation: Push lug (arrow) of loudspeaker (3) forward under the instrument panel, then clip in place at rear.

5

Separate electrical connections (4)

6

Install in the reverse order