Remove/install actuator motor for fresh and recirculated air flaps

AR83.10-S-2001S

Remove/install actuator motor for fresh and recirculated air flaps

06.12.2019

Model

636, 639.601/603/605/701/703/705/711/713/811/813/815

1

Screw

2

Linkage rod

3

Linkage rod

4

Electrical connector

M16/21

Fresh air/air recirculation flap actuator motor

 

Remove/install

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

1

Remove center stowage compartment

AR68.10-S-1620S

2

Remove screw/bolt (1)

3

Unhook linkage (2)

4

Unhook linkage (3)

5

Disconnect electrical connector (4) from fresh air and air recirculation flap actuator motor (M16/21)

6

Remove fresh air and air recirculation flap actuator motor (M16/21)

 Unclip fresh air and air recirculation flap actuator motor (M16/21).

7

Install in the reverse order



Check

8

Perform function check on fresh air and air recirculation flap actuator motor (M16/21)

 Switch on ignition, operate blower switch and check ventilation nozzles for correct operation.