Shown on model 639.8 |
1 | Door stopper trim (with model 639.6 with code VA6 (side wall, fully lined) or with code V23 (interior trim, superior quality), with model 636, 639.7/8) |
2 | Door stopper screws |
3 | Door stopper |
N72.16-2088-01
N72.16-2091-01
| Remove/install | ||
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Unclip the door stopper trim (1) | With model 636, 639.7/8, model 639.6 with code V23 (interior trim, superior quality) or with code VA6 (side wall, fully lined) | |
Long wedge | |||
2 | Unscrew the door stopper screws (2) | ||
3 | Remove the door stopper (3) | ||
4 | Install in the reverse order |
115 589 03 59 00
Long wedge
Referenced documents
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)