AR72.16-D-2210D | Disassemble/assemble sliding door | 17.1.01 |
MODEL 903.612 /613 with CODE (PG3) Integral box body with shelf system
MODEL 903.612 /613 with CODE (PG4) Integral box body without shelf system
MODEL 903.612 /613 with CODE (Z22) Post freight delivery service
D72.16-1109-09
1 Sliding door
2 Bottom sliding base
3 Bolt
7 Guide
8 Bolt
9 Spacer
4 Stop buffer
5 Bolt
6 U washer
D72.16-1112-09
10 Door lock
11 Bracket
12 Contact switch
15 Cable duct
16 Outer door handle
13 Bolts
14 Grab handle
| Disassemble/assemble | ||
1 | Remove sliding door (1) | ||
2 | Move out bottom sliding base (2) | ||
3 | Remove stop buffer (4) | ||
4.1 | Remove guides (7) | New sliding door (1) is delivered with installed guides (7) | |
5 | Remove sliding door lock (10) | ||
6 | Remove bracket (11) with contact switch (12) | ||
7.1 | Remove handle (14) | New sliding door (1) is delivered with installed retaining handle (14) | |
Hand riveter | |||
Drill (electric/pneumatic) | |||
8.1 | Remove wiring duct (15) | New sliding door (1) is delivered with installed cable duct (15) | |
Hand riveter | |||
Drill (electric/pneumatic) | |||
9.1 | Remove outer door handle (16) from sliding door | New sliding door (1) is installed with installed outer door handle (16) | |
10 | Assemble in reverse order |
Commercially available tools
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
Referenced documents
- ar7216d1260d Remove/install sliding door
- ar7216d2220d Remove/install outer door handle on sliding door
- ar7216d4035d Remove/install door lock of sliding door