AR72.16-D-1260D | Remove/install sliding door | 17.1.01 |
MODEL 903.612 /613 with CODE (PG3) Integral box body with shelf system
MODEL 903.612 /613 with CODE (PG4) Integral box body without shelf system
MODEL 903.612 /613 with CODE (Z22) Freight delivery service for post office
D72.16-1108-09
| Remove/install | ||
Danger! | Risk of injury to fingers being jammed or squeezed when removing and installing or aligning hoods, doors, trunk lid/tailgate or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Open sliding door (1) to stop. | ||
2 | Secure sliding door (1) with jack stands | ||
3 | Remove center carriage (2) of sliding door | ||
4 | Unscrew nuts (3) from upper carriage (4) | Have helper secure sliding door (1) against falling down. | |
Installation: Use new nuts (3). | |||
5 | Remove sliding door (1) | Remove sliding door (1) with helper to avoid damaging paint. | |
Move sliding door (1) toward front of vehicle, remove and put down on suitable subsurface | |||
6 | Remove upper carriage (4) | ||
7 | Install in the reverse order | ||
8 | Adjust sliding door (1) |
Referenced documents
- ar7216d1023d Adjust sliding door
- ar7216d2230d Remove/install sliding door center carriage
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.