AR72.16-D-4035D | Remove/install door lock of sliding door | 27.2.12 |
MODEL 903.612 /613 with CODE (PG3) Integral box body with shelf system
MODEL 903.612 /613 with CODE (PG4) Integral box body without shelf system
MODEL 903.612 /613 with CODE (Z22) Freight delivery service for post office
D72.16-1126-09
| Remove/install | ||
Danger! | Risk of injury to fingers being jammed or squeezed when removing and installing or aligning hoods, doors, trunk lid/tailgate or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Remove plug (1) | ||
2 | Unscrew screws | The screws are concealed by the plug (1) | |
3 | Remove door handle (2) with inner actuation (3) | Installation: Check inner actuation (3) for proper function. | |
4 | Unscrew screws (4) | ||
5 | Remove door arrester (5) together with spacer | ||
6 | Unscrew screws (6) | ||
7 | Remove door liner (7) | ||
8 | Unhook release control cables (8) | ||
9 | Disconnect connector (9) | ||
10 | Remove contact pins from connectors | Transfer cable color to connector. | |
11 | Expose cable (10) up to door lock (11) | ||
12 | Unscrew the bolts (12). | Installation: Glue in screws (12) again. | |
Loctite 243 | |||
13 | Remove door lock (11) together with cable (10) from sliding door (13) | ||
14 | Install in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1133-02A | Loctite 243 | A 613 989 09 71 |
Referenced documents
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.