Remove/install rear roof paneling · ar6830s7608a · Mercedes-Benz WIS

AR68.30-S-7608A

Remove/install rear roof paneling

6.9.96

MODEL 638

S68.30-0004-06

1 Rear roof paneling

2 Sliding rail paneling

3 Inner paneling between B- and C-pillar

4 Right C-pillar Inner paneling

5 Left C-pillar inner paneling

6 Right D-pillar inner paneling

7 Left D-pillar inner paneling

8 Grab handle

13 Coat hook

14 Top luggage net bracket

15 Interior light

23 Luggage net catch

24 Guide shell for rear-end door

25 Bracket of luggage cover

26 Velcro fasteners with support

27 Velcro fastener

29 Clips

 	Remove/Install
1	Remove curtains	Only with code VB1
2	Remove sliding roof motor paneling	Only with code D24
3	Detach sliding roof frame paneling	Only with code D23 and D24  Pull down front and side paneling then extend forward.
4	Remove D-pillar paneling		AR68.30-S-4495A
5	Remove paneling on C-pillar		AR68.30-S-4490A
6	Remove paneling on B-pillar		AR68.30-S-4700A
7	Remove rear roof frame paneling		AR68.30-S-4470A
8	Detach sliding rail paneling (2) downward	 The paneling is fastened with a screw.
9	Remove top bracket of luggage net (14)
10	Remove interior lamp (15)
11	Unscrew bracket of coat hook
12	Pull rear headliner (1) downward and loosen Velcro fasteners (26, 27) with a long wooden slat	 Replace torn off Velcro fasteners or glue once again on the paneling
13	Unlatch lateral headliner and pull out toward rear	 Installation: Exchange front clamps (29) against new elongated version, if necessary
14	Install in the reverse order