ar6830s4495a

Removing and installing paneling on D-pillar

Type ar · topic 68.30 · version 0101 · 2000-12-05

Applies to: MODEL 638.1 /2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 638 (models 1**, 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 638 (models 1**, 2**)

AR68.30-S-4495A

Removing and installing paneling on D-pillar

26.2.97

MODEL 638.1 /2

Removing and installing paneling on D-pillar

S68.30-2509-06

1 Inner side paneling in cargo space

2 Mounting screws

3 Grab handle

4 D-pillar paneling

5 Spacers

Removing, installing

1

Remove inner side paneling in cargo
space (1)

AR68.30-S-1180B

2

Remove air ducts for rear air conditioning

Only with code HH7.

AR83.50-S-4000A

3

Unscrew mounting screws (2) of
D-pillar paneling (4)

This mount consists of plastic screws with spreading clip mounts.

4

Unscrew grab handle (3)

Pay attention to installation position of handle (3) and spacers (5).

5

Unclip D-pillar paneling (4)

6

Disconnect electrical connector from pneumatic suspension switch

Only on right side of vehicle.

Set vehicle to Service mode

See Operating Manual

7

Install in the reverse order

Referenced documents