Remove/install and disassemble rear shelf

AR68.30-P-4580EC

Remove/install and disassemble rear shelf

6.12.10

 

Remove/install

1

Remove left and right C-pillar paneling

 Place C-pillar paneling with attached seat belt to one side.

AR68.30-P-4490EC

2

Remove rubber from left and right expansion clip (4) and remove expansion clips (4)

 Clip remover

*452589016300

3

Disconnect electrical connector (2)

On vehicles with code (540) Roller sun blind

4

Remove bolts (6)

On vehicles with code (540) Roller sun blind

5

Move rear shelf (1) over the rear backrest locks (5)

6

Lift rear shelf (1) in the area of the rear shelf bass speaker (H4/29) with right rear surround speaker (H4/57)

On vehicles with code (810) Sound system and with code (540) Roller sun blind

7

Place foam material (7) in the area of the rear shelf bass speaker (H4/29) with right rear surround speaker (H4/57) to one side

On vehicles with code (810) Sound system and with code (540) Roller sun blind

8

Remove rear shelf bass speaker (H4/29) with right rear surround speaker (H4/57)

On vehicles with code (810) Sound system and with code (540) Roller sun blind

AR82.62-P-7836EC

9

Remove rear shelf (1).

 On vehicles without code (540) Roller sun blind, lead catch hook (13) of the rear shelf (1) forwards from the supports (14) at the same time.

10

Install in the reverse order

 

Disassemble/assemble

11

Connect electrical connector (2), extend roller sun blind of roller sun blind unit (3) approx. 20 cm with the aid of a helper and disconnect electrical connector (2) again

On vehicles with code (540) Roller sun blind

 By extending the roller sun blind of the roller sun blind unit (3), the roller sun blind unit (3) can be removed from the rear shelf (1).

12

Remove clip (8)

On vehicles with code (540) Roller sun blind

13

Expose electrical wiring harness (9) of the roller sun blind unit (3) at the rear shelf (1)

On vehicles with code (540) Roller sun blind

14

Unscrew nuts (12) and guide roller sun blind unit (3) out of rear shelf (1) and remove

On vehicles with code (540) Roller sun blind

15

Unclip and remove Top Tether (10) and speaker (11) covers from the rear shelf (1)

 Mounting wedge

*110589035900

16

Assemble in the reverse order