Remove/install trim at C-pillar

AR68.30-P-4490EC

Remove/install trim at C-pillar

17.5.11

 

Remove/install

1

Remove rear seat cushion (2)

Model 204.3, 207

AR91.12-P-1020EC

2

Unscrew screw (4) from belt end fitting



*BA91.40-P-1006-01P

3

Detach rear bottom side paneling (6) in rear area

 Detach rear bottom side paneling (6) only until C-pillar paneling (1) is accessible and can be removed

AR68.30-P-4780ED

4

Release rear seat backrest (5) and fold forward

5

Unclip catch hook (9) from the cover (7) with assembly wedge (8)

 Assembly wedge

*110589035900

6

Lift cover (7), guide out of the C-pillar paneling (1) in the lower area and remove downwards

 Installation: Insert lugs (10) into the top of the C-pillar paneling (1) first and then position cover (7) on the C-pillar paneling (1).

7

Remove bolt (11)

8

Unclip catch hook (18) of C-pillar paneling (1) at clamp (16)

 Installation: Check clamp (16) for correct fit in body, align if necessary. Align edge guard (15) to C-pillar paneling (1).

9

Pull out C-pillar paneling (1) forwards on the guides (17) from the rear shelf (14) supports (13)

10

Unclip rosette (12) at the C-pillar paneling (1)

 Assembly wedge

*110589035900

11

Remove rear seat belt (3) from C-pillar paneling (1) and remove C-pillar paneling (1)

12

Install in the reverse order

Number

Designation

Model
204.3

Model
207

BA91.40-P-1006-01P

Bolt at rear belt end fitting

Nm

35

35