Remove/install D-pillar trim

AR68.30-P-4497ME

Remove/install D-pillar trim

30.10.2018

Model

167.1

1

C-pillar paneling

4

D-pillar paneling

2

Cover

5

Screw

3

Cover

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove C-pillar trim (1).

AR68.30-P-4490ME

2

Fold seat backrest of third seat row forward.

Model 167.1
with code 847 (3rd seat row)

3

Fold up cover (2).

Model 167.1
with code 847 (3rd seat row)

4

Remove side cover (3) from seat bench of third seat row.

Model 167.1
with code 847 (3rd seat row)

5

Remove screw (5).

Model 167.1
with code 847 (3rd seat row)

 Screw, seat belt end fitting/seat belt buckle of 3rd seat row to body

*BA91.40-P-1014-01U

6

Thread seat belt through D-pillar trim (4).

Model 167.1
with code 847 (3rd seat row)

7

Unclip D-pillar trim (4), pull back slightly, and remove.

8

Install in the reverse order.

 Seat belts/emergency tensioning retractors

Number

Designation

Model 167

BA91.40-P-1014-01U

Screw, seat belt end fitting/seat belt buckle of 3rd seat row to body

Nm

35