ar6830p4490mec

Remove/install trim at C-pillar

Type ar · topic 68.30 · version 0100 · 2019-06-17

Applies to: Model 167.3

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 167 (models 3**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 167 (models 3**)

AR68.30-P-4490MEC

Remove/install trim at C-pillar

12.04.2019

Model

167.3

Remove/install trim at C-pillar

1	Edge guard
2	Cover
3	C-pillar paneling

P68.30-A022-06

 Warning	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Notes on HANDS-FREE ACCESS		AH80.61-P-0001-01A
 	Remove/install
1	Remove top side load compartment trim.		AR68.30-P-1186MEC
2	Release edge guard (1) in the working area.
3	Remove cover (2).
4	Unclip C-pillar trim (3) (arrows A) and remove.	 Installation: Ensure that the C-pillar trim (3) is hooked onto the side wall (arrow B).
		 Long wedge	*115589035900
5	Install in the reverse order.

Remove/install trim at C-pillar

115 589 03 59 00

Long wedge

Referenced documents

ah0000z001901a Notes on safety-relevant components
ah8061p000101a Notes on HANDS-FREE ACCESS
ar6830p1186mec Remove/install upper side load compartment trim
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.