Remove/install rear roof paneling

AR68.30-D-7608A

Remove/install rear roof paneling

05.12.2019

Model

906.657

with code P0E (Sprinter Tourer master code)

Model

906.657

with code P0F (Master code for Sprinter Tourer 19+1 Inland)

Model

906.657

with code P0G (Master code Sprinter Tourer 16+1)

Model

906.657

with code P0H (Master code Sprinter Tourer 19+1)

Model

906.657

with code PE4 (DCAA bus master code, Argen)

Model

906.657

with code PE5 (Mastercode, bus seats on raised base, Argen)

1

Rear headliner

3

Cover

5

Cover

2

Rear center headliner

4

Retaining frame

6

Service flap

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove left and right stowage compartment in passenger compartment

AR68.70-D-1000A

2

Remove guide rails of left and right stowage compartment in passenger compartment

AR68.70-D-1001A

3

Remove rear section of rear center roof lining (2)

AR68.30-D-7612A

4

Remove paneling (3, 5)

 To do this, unscrew screw/bolts.

5

Remove service flap (6) and retaining frame (4)

 To do this, unscrew screw/bolts.

6

Unscrew bolts in area of removed retaining frame (4)

7

Open rear-end doors

8

Detach sealing frame of rear-end doors in area of rear roof lining (1)

9

Unclip caps (arrows) and unscrew bolts below

 The number of caps (arrows) and bolts can vary depending on the version.

 Clip remover

*452589016300

10

Detach rear roof lining (1) at side on body and remove

11

Transfer bores, cutouts and openings to new rear roof lining (1) and incorporate

When replacing rear headliner (1).

12

Install in the reverse order