Model | 906.657 |
with code P0E (Sprinter Tourer master code) | |
Model | 906.657 |
with code P0F (Master code for Sprinter Tourer 19+1 Inland) | |
Model | 906.657 |
with code P0G (Master code Sprinter Tourer 16+1) | |
Model | 906.657 |
with code P0H (Master code Sprinter Tourer 19+1) | |
Model | 906.657 |
with code PE4 (DCAA bus master code, Argen) | |
Model | 906.657 |
with code PE5 (Mastercode, bus seats on raised base, Argen) |
D68.30-2461-08
1.1 | Center headliner parts segment | 2 | Headliner |
D68.30-2460-09
1.1 | Center headliner parts segment | 3 | Cover | 6 | Cover | ||
1.2 | Center headliner parts segment | 4 | Retaining frame | 7 | Dome lamp | ||
1.3 | Center headliner parts segment | 5 | Service flap | 8 | Roof hatch paneling | ||
1.4 | Center headliner parts segment |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove left and right stowage compartment in passenger compartment | ||
2 | Remove guide rails for left and right stowage compartment in passenger compartment | ||
3 | Unscrew screw of roof lining (2) | When removing center roof lining section (1.1). | |
For this purpose, unclip cap (arrow). | |||
Number of screws can vary depending on design. | |||
Clip remover | |||
4 | Remove roof hatch paneling (8) | ||
5 | Remove service flap (5) and retaining frame (4) for rear air conditioning system | Vehicles with rear air conditioning system. | |
To do this, unscrew screw/bolts. | |||
6 | Remove linings (3, 6) | To do this, unscrew screw/bolts. | |
7 | Remove rear dome lamp (7) | ||
8 | Unscrew screws on center roof lining section (1.2) and center roof lining section (1.3) | When removing center roof lining section (1.2) and center roof lining section (1.3). | |
For this purpose, unclip caps (arrow). | |||
Number of screws can vary depending on design. | |||
Clip remover | |||
9 | Detach corresponding center roof lining sections (1.1, 1.2, 1.3, 1.4) at side on body and remove | ||
10 | Transfer bores, cutouts and openings to corresponding new center roof lining sections (1.1, 1.2, 1.3, 1.4) | When replacing respective center roof lining sections (1.1, 1.2, 1.3, 1.4). | |
Installation: Incorporate bores, cutouts and openings in corresponding new center roof lining parts (1.1, 1.2, 1.3, 1.4). | |||
11 | Install in the reverse order |
452 589 01 63 00
Clip remover
Referenced documents
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar6870d1000a Remove/install stowage compartment in passenger compartment
- ar6870d1001a Remove/install guide rails for stowage compartment in passenger compartment
- ar7755d5015a Remove/install roof hatch trim
- ar8220d0117a Remove/install dome lamp in passenger compartment