Remove/install right B-pillar paneling up to character bead

AR63.20-D-0002FA

Remove/install right B-pillar paneling up to character bead

22.02.2017

Model

909

with code T16 (Sliding door right)

Shown on model 909.632

1

Right B-pillar paneling bottom section

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

General information on body repair

AH60.00-N-0001-01A



Remove

1

Remove detachable parts in area to be repaired

2

Cover all detachable parts remaining on vehicle with spark protection blankets

3

Separate right B-pillar panel bottom section (1)

AR63.20-D-0002-01FA

1K-zinc dust paint

*BR00.45-Z-1056-07A

 Spot weld milling cutter

*201589005100



Install

4

Prepare right B-pillar panel bottom section (1) for installation

AR63.20-D-0002-02FA

1K-zinc dust paint

*BR00.45-Z-1056-07A

 Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

5

Weld in right B-pillar panel bottom section (1)

AR63.20-D-0002-03FA

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

6

Clean welds and sheet metal flanges

7

Remove spark protection blankets

8

Clean repair area

9

Prime repair area using primer filler

 Use only primer filler approved by Daimler AG:
https://xentryportal.i.daimler.com

10

Seal seam following repairs

AR97.10-D-4000F

11

Paint repair areas and adjacent surfaces

 Use only paints approved by Daimler AG:
https://xentryportal.i.daimler.com

12

Add cavity preserving agent

AR97.20-D-1500F

13

Install all detachable body components in area to be repaired

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00