ar6320d000201fa

Separating right B-pillar paneling bottom section

Type ar · topic 63.20 · version 0100 · 2013-11-22

Applies to: MODEL 909

Where it sits

Function group 3 Body › 63 Side wall › 63.20 Pillars — Series 909

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.45 column — Series 909

AR63.20-D-0002-01FA

Separating right B-pillar paneling bottom section

MODEL

909

Separating right B-pillar paneling bottom section

1

Mark separation lines (3) on right B-pillar paneling (2).


Dimensions:
a = approx. 25 mm
b = approx. 260 mm

D63.20-0054-06

Separating right B-pillar paneling bottom section

2

Expose spot welds on right B-pillar paneling (2) up to marked separation lines (3) and cut out (area A, B and C).


3

Separate right B-pillar paneling (2) at marked separation lines (3).


4

Remove right B-pillar paneling (2) bottom section.

D63.20-0055-06

Separating right B-pillar paneling bottom section

5

Grind mating surfaces down to bare metal (area A1 and A2).


6

Grind spot weld flange down to bare metal on both sides and coat inside with zinc dust paint (areas B1, B2 and B3).

D63.20-1461-06