Remove/install guard plate on high-voltage battery carrier · ar6140d1005te · Mercedes-Benz WIS

AR61.40-D-1005TE

Remove/install guard plate on high-voltage battery carrier

03.12.2019

Model

910 with engine 780.703

D61.40-A000-76

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
 Danger	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
Topical note	General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system		AH00.00-Z-0300-01A
 	Remove/install
1	Remove underbody paneling.		AR61.30-D-1001TS
2	Remove screw/bolts (2) .	 Screw, protective plate to high-voltage battery carrier	*BA61.40-N-1001-01TS
3	Remove protective plate (1).	 To do this, remove screws/bolts (3). Helper required.
		 Screw, protective plate to high-voltage battery carrier	*BA61.40-N-1001-01TS
4	Install in the reverse order.

 Underbody protection

Number	Designation		Model 910 with engine 780.703
BA61.40-N-1001-01TS	Screw, protective plate to high-voltage battery carrier	Nm	50

ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
ar6130d1001ts Remove/install underbody paneling
as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)