ar6130s0010ev

Remove/install water shield

Type ar · topic 61.30 · version 0105 · 2019-12-09

Applies to: Model 639.603/703 with engine 780.994 with code MA0 (E-CELL 60 kW)

Where it sits

Function group 3 Body › 61 Substructure › 61.30 Splash guard — Series 639 (models 603, 703)

EinPAS 35 Body/frame/detachable parts › 35.25 Insulation/trim below/sealing/underbody protection › 35.25.41 Underfloor paneling/noise encapsulation/underbody protection — Series 639 (models 603, 703)

Also applies to engines/gearboxes: 780 994

AR61.30-S-0010EV

Remove/install water shield

03.12.2019

Model

639.603/703 with engine 780.994

with code MA0 (E-CELL 60 kW)

Modification notes

18.10.2013

"High-voltage disable" removed.

Remove/install water shield

1

Splash guard

2

Quick-release couplings

S61.30-4501-06

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Remove/install

1

Lift vehicle with vehicle lift

AR00.60-S-1000S

2

Release quick-release couplings (2) and remove splash guard (1)

3

Install in the reverse order

Referenced documents