Tilt cab to repair position, tilt back · ar6080g0010bb · Mercedes-Benz WIS

AR60.80-G-0010BB

Tilt cab to repair position, tilt back

6.7.09

MODEL 405.100 /102 /120 /122 /200 /220 with BODY 405.820 with CODE (F60) Raising system for cab

MODEL 405.101 /103 /121 /123 /201 /221 with BODY 405.821 with CODE (F60) Raising system for cab

G60.80-3143-01

1 Hydraulic pump

2 Selector lever

3 Safety strut

G60.80-3344-01

	Tilt cab
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.	AS60.80-Z-0001-01A
1	Open engine hood and raise to vertical position		AR88.40-G-1000B
2	Set selector lever (2) of hydraulic pump (1) to "lifting" position	 Pay attention to loose objects in cab.
		 Tilting back: Set selector lever (2) to "lowering" position.
	Notes on tilting the cab	Model 405, 408, 418, 427, 436.330, 437	AH60.80-N-0003-01B
3	Install tool (SW 30) on hydraulic pump (1) and pump up cab	 The vehicle lock is unlocked by the hydraulic pump (1). Pump up cab to end stop.
		 Tilting back: Actuate hydraulic pump (1) until cab is positioned forward to the front of the vehicle and a strong resistance is felt.
4	Install safety support (3) on piston rod	 Observe adhesive labels.
5	Lower in reverse sequence	 Tilting back: Ensure that lines, hoses, etc. have sufficient clearance.

ah6080n000301b Notes on tilting the cab
ar8840g1000b Opening engine hood, moving to upright position and closing
as6080z000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted